For this you would be recommended to follow the dimensions given*

All you need for making your own Self made Game Pitch includes :

1. Two or maximum 4(check pt.10 of procedure) sets of Cartridge Paper
2. Colous (any)
3. Marker
4. Cricket Attax logo (you can cut it from the game code cards or print one logo)
   

PROCEDURE

1. Cut a 49cm x 31cm cartridge paper
   
2. Draw the boxes as given in the above picture of sizes 8.7 cm x 6.2 cm
   
3. A gap of 2cm should be present between the left side of the paper and the first box on the right and the right side of the paper to the first left box
   
4. A gap of 1.5cm should be there on top and the first box and vice versa
   
5. A gap of 1.5cm should be there (left to right) between the two boxes
   
6. A gap of 1cm should be there (top to bottom) between the two boxes
   
7.  Label the boxes accordingly by seeing the above picture
   
8. Colour the pitch as you want
9. Lastly stick the CA logo
   
10. You can also make the slits at the bottom of eack boxes for putiing the card (after making the slit stick another 49cm x 31cm cartridge paper on the back so that the cards do not slide and pass through it)
    

USE THE SAME PROCEDURE TO CREATE A SECOND ONE AND STICK THE TWO IN BETWEEN IN OPPOSITE DIRECTIONS FACING THE PLAYER.

THE SAME CAN BE USED TO MAKE A SELF MADE GAME MAT FOR EITHER SLAM ATTAX OR MATCH ATTAX. YOU CAN CHANGE THE FORMATION OF THE BOXES ACCORDINGLY FOR THESE TWO.

 *My Game Mat was a little bit smaller so the boxes were too close so it would be recommended to follow the given dimensions